By Dan Moren

July 22, 2026 7:00 AM PT

Review: Xteink X3 is the little e-reader the world’s not quite ready for

The market for small e-readers has been booming lately. Earlier this year, Jason took a look at the Xteink X4, a pint-sized reading device that was about as light and small as they come. But those maniacs at Xteink weren’t done yet: they followed it up with the $79 X3, which is unbelievably even lighter and smaller.

I wouldn’t blame you for wondering if there’s such a thing as too small and light—at 3.84 inches by 2.51 inches (and just 0.2 inches thick) the X3 is still larger than, say, a credit card, but not by much. The screen itself measures just 3.7 inches, more than half an inch smaller than the X4’s 4.3 inch, but its 259 ppi resolution still makes it plenty easy to read on.¹ At that size it’s little imposition to take it with you wherever you go. Easy to lose? Maybe. Easy to love? Yes.

For one thing, this small size unlocks at least one capability that the X4 couldn’t fully deliver upon—the ability to stick to the back of your phone. Like the X4, the X3 has a MagSafe-compatible magnet in its rear case and it fits just about perfectly on the back of my iPhone 17 Pro, nestled below the camera plateau.

However, the magnet is not particularly strong, and it lacks the secondary stabilizing magnet that you see on official MagSafe accessories, meaning it wobbles around a bit. I wouldn’t call it a super secure connection, but it’s pretty good if you’re just slipping it in and out of a pocket. Just be aware that it probably will come loose.

Like the X4 before it, the X3 features a pair of rocker switches on the front for a total of four possible buttons. But they’ve opted to skip the X4’s side mounted rocker switch in favor of a single buttons on each side. There’s also an on/off switch at the top (plus a recessed button used for resetting the device). And with all of that, they somehow managed to continue to fit a microSD slot in the top. The bottom left corner also has a little set of holes for a lanyard or wrist strap.

The one casualty of the smaller X3, however, is the port. The X4 was big enough to accommodate a USB-C connector, but the X3’s thin profile makes that impossible. Instead, there’s a pogo-pin USB cable that connects to four magnetic contacts on the reader. Is this a step back? Strictly speaking, yes. Using a proprietary connector is a bummer in the year 2026, especially because it means having to keep track of a single-use cable. That said, once you get the X3 up and running, the only real need for the connector is charging, and the battery on this thing lasts a very long time. (I’ve yet to run it down in several weeks of usage.) Just remember to make a note of where you stow that cable for the point months down the road when you do need to charge it and find yourself wondering whatever happened to it.

As with the X4, the X3 lacks any sort of screen lighting, meaning that it’s strictly a “read in bright light” device. But don’t worry, because Xteink has already unveiled a new X4 Pro with the company’s first lit screen.²

All in all, I found the X3 very comfortable to read on, whether attached to my iPhone or not. The side buttons work great as page-turners, and the screen is high-contrast and sharp enough to make text render very clearly. All in all, it’s a great reading experience—if you take into account one major caveat.

Soft where?

The elephant in the room for the Xteink X3 is the software. Xteink ships the X3 with its own built-in firmware which, by all accounts, has improved since the first version. But I can’t really tell you, because upon opening the box and powering up the device, the first thing I did was install Crosspoint, the open-source community-built firmware that has turned this device from a curiosity into a real contender.³

Unlike a lot of other firmware replacements, Crosspoint is super easy to install; you can do it right from a web browser. While it’s not fully free of technological hurdles, I’d say that most people comfortable using an e-reader or updating their iPhones will be able to handle the process with few problems. And the benefits are manifold.

Crosspoint goes beyond simply turning this into a functional device and into one that is actually fun to use. It’s got a straightforward, easy to navigate interface that makes it simple to do everything from reading to loading books (accomplished via a web-based interface). For those who like to tweak their reading setup, there are plenty of configuration options, everything from screen orientation to hyphenation and, yes, custom fonts loaded via the SD card.

Even the onscreen keyboard that you need to use for various configuration tasks is pretty solid for what’s available—on par with navigating via an onscreen keyboard with a game controller, in my opinion. I wouldn’t want to have to type in my Wi-Fi password every time—and you don’t, because it saves it for you—but one time was fine.

There are also a bunch of other features that might appeal to those who want to take reading to the next level. For example, support for Open Publication Distribution System (OPDS) standard means that if you want to host your book library on your own server, you can point your reader at that and download any of the books you already own directly to your device. There’s also support for KOreader sync to help keep your place between supported devices.⁴

Crosspoint has been so successful, in fact, that the team at Xteink has smartened up and started collaborating. (This after a brief moment when it looked like the company might try to firmware lock its devices.) Now, not only do the “developer editions” sold directly by the company continue to allow you to install the custom firmware, the company has been working with the Crosspoint team to make sure new devices, like the X4 Pro, will already be supported when they arrive. While Xteink hasn’t quite adopted Crosspoint as the default OS, it’s not far off.

The world is not enough

Given how positive I’ve been above, you might be all too tempted to run out and snap up an Xteink X3 for yourself. I don’t blame you! At $79 (and often discounted for less than that), it’s well positioned as an impulse buy. And while I don’t want to dissuade you, I have to note the biggest caveat of all: the world.

If there’s one thing that’s holding back the X3 and the X4 and, frankly, all the other wacky readers out there, it’s the market. The e-reader space is still unquestionably dominated by Amazon purveying its razors-and-blades strategy: buy the Kindle for cheap⁵ and the company earns it all back when you buy your books or sign up for Kindle Unlimited’s all-you-can-eat plan. Kobo, who makes the hardware that I prefer, is a distant second, and has some advantages, but operates on roughly a similar scheme.

Both of these companies benefit from lock-in in the form of Digital Rights Management. DRM is, of course, largely pushed by publishers, who insist upon cryptographic schemes to lock down the books they sell in order to nominally protect against piracy. Never mind the fact that books are still easily and widely pirated, the DRM is relatively simple to crack⁶, and many of those books have been vacuumed up by the boatload by an even more insidious thief in the form of AI training data.

I come at this, of course, from the perspective of both reader and writer. As a writer, I certainly want to be compensated for all the hard work I put in to create my books, but I also want people to read and enjoy them. That’s why you’ll find no stauncher defender of libraries.

Personally, I find the industry’s insistence on DRM misplaced, just as I did with the music industry two decades ago. The lack of these security features does not automatically turn people at large into thieves and it’s insulting to think that it would. In fact, the sci-fi publisher Tor, one of the biggest names in the business and a subsidiary of Big Five publisher Macmillan, has put out its titles without DRM for almost fifteen years and I haven’t seen any significant indication that it’s harmed their business. Many of my books are also available directly from my publisher without DRM, and I don’t think that’s put a dent in my bottom line either.

I would love to be able to easily load any book I’ve ever purchased onto my Xteink devices—or, for that matter, any e-reader or e-reading app of my choice. There are, of course, extensive repositories of DRM-free public domain books available. Amazon, to its credit, does now allow you to download DRM-free copies of any book that you’ve purchased.⁷ I argued a few years back that this is an opportunity for Apple to distinguish its stagnant ebook marketplace from the competition. But for first-run books, your options are currently more limited (and sometimes harder to suss out).

I’d also love to somehow see support for Libby, the popular library ebook borrowing app, on Xteink devices, though I don’t see that happening anytime soon. But in my opinion, the bottom line is that more ways to read makes more readers of books, which in turn makes more customers of books.

But I digress.

The conclusion

The other week I was riding the train with my kid, our usual weekend pastime. As he was enjoying looking out the window, I was reading a book on the X3, magneted to the back of my iPhone 17 Pro. As we neared a stop, a woman nearby caught sight of it and marveled over it. “Is that a tiny e-reader?”

I extolled its virtues for a moment before they got off at their stop. But it told me one important thing: there’s a hunger for these types of devices. Because people who self-select as readers in this day and age are, above all, passionate. You have to make a choice to be sitting and reading a book when you could be watching TikTok or Instagram or listening to music or a podcast, all of which are constantly at your fingertips.

That’s where the X3 (and the X4) deliver. A Kindle or Kobo isn’t exactly bulky, but they’re not pocketable either. Being able to take your e-reader with you just as we stuffed mass market paperbacks in our back pockets in days gone by is freeing and fun. Now if the world might just shift a little bit more to meet us, maybe we could free ourselves a little further.

[Dan Moren is the East Coast Bureau Chief of Six Colors, as well as an author, podcaster, and two-time Jeopardy! champion. You can find him on Mastodon at @dmoren@zeppelin.flights or reach him by email at dan@sixcolors.com. His next novel, the sci-fi adventure Eternity's Tomb, will be released in November 2026.]

If you appreciate articles like this one, support us by becoming a Six Colors subscriber. Subscribers get access to an exclusive podcast, members-only stories, and a special community.